NEW CYBERLINX! CYBERTRUCK

Description

N2ITIVE’s CyberLinx  Ride Height adjustment Lowering Links are the first Lowering Links designed for the CyberTruck in the world.  Our links allow you to fully retain your active suspension dampening and software ride height adjustability with every setting now being a little lower than before.   The CYBERLINX version of our RSX-3 lowering links are designed to fit the new Tesla Cybertruck model.

Beyond lowering brackets, our super precision performance tuners allow you to tweak the length of the link down to 1/10 of a millimeter.  You’re never forced into one setting.  You choose the height you want.  Each link has a Vernier scale built-in so you always know what length you’re set to.  You can easily assure all links are at the exact same setting for a super precise ride height.  No need to remove the links and use a caliper every time you want to change your height.  Our links offer the ability to do a subtle drop or a completely slammed drop of your CyberTruck.

The CYBERLINX ride height adjustment lowering links come in two variations:  Anodized red with a 6-year warranty or our black on black electroless nickel plated finish with a lifetime warranty.  Each set comes with 4 links.  Installation takes only 30 minutes by the home mechanic. Front lowering links can be installed with the front wheels in place. Rear wheels need to be removed for installation.

5 Reasons To Choose Our New Performance RSX-3 Tesla Cybertruck Lowering Links

1. Dial in the right height for you: N2ITIVE’s adjustable lowering links for the Tesla Cybertruck allow uber precise adjustment down to 1/10^thmm that can easily and quickly be replicated on all links.  Just rotate the adjustment dial to match the same number setting.  No need to unplug/disconnect the links first.  Easily adjust them while they’re in the car!  With other adjustment links you have no practical way of knowing what setting you’re at or how long the individual links are.  It’s a guessing game that can leave one side of the vehicle higher than the other or error messages on your screen. This is a common frustration when lowering a Tesla.  With other links, you have to go back and jack up the car, remove the wheels, make the adjustment, put the wheels back on and then measure to make sure you have the height correct and all sides are even.  Until now this would have to be done multiple times to get it right.  With the RSX-3 links you can set it once and your done.  We designed these links to be super quick, easy and accurate.
2. Simple locking mechanism:  We have a single setscrew that allows you to easily make adjustments with a single 1.5mm Allen wrench which is included in the box.  So in other words, to change the length of your links you slightly loosen the Allen screw, dial in the new ride height setting you want and then re-tighten the Allen screw.  With other adjustment links you’ll need to remove the links first and then use two wrenches to loosen two separate locking nuts per link, then make the length adjustment not really knowing how long the link is without a caliper, then re-tighten both locking nuts again and hope you got the correct and even height all around the vehicle.
3. Easy calibration:  If you ever need to have your sensors re-calibrated from Tesla at some point, our links can easily be reset to “0” which is the factory length.  Then after calibration they can quickly be set back to whatever lowered setting you previously had.  No other lowering links offer this and most lowering brackets would need to be removed and replaced with the original brackets before re-calibration was done.
4. Design & Quality:  Our thought process on our performance RSX-3 lowering links was to use the highest quality materials and a really well thought out design to create something from the ground up.  We wanted to create something that was really nice both in function and aesthetics, especially being that they’re made for a the most amazing cars on earth.
5. Corrosion Resistance:  All parts are either anodized or electroless nickel plated and have Viton® seals to prevent water/salt intrusion for the longest durability.  Now shipping with our new German made TPU end sockets!

Please note that lowering your Tesla brings the vehicle closer to the ground which could potentially make the undercarriage including the battery more vulnerable to damage.  While we haven’t had any complaints we wanted to give you a heads up of the possibility.  N2ITIVE, LLC or it’s owners or employees are not responsible for any damage caused to your vehicle.