-
These stainless steel bolts are made to replace the plastic ball ends of the factory ride height sensor swing arm. The plastic ball ends have been known to break off when removing the stock links. The fix is to drill a 6mm hole through the arm where the original plastic ball end was, replacing it with this stainless steel option. It features a nylon locking nut to ensure it stays in place for the life of the sensor. Ships with (2) Ball Bolts and (3) Nylon Locking Nuts
-
These T-30 Torx bolts fit the standard N2itive clamp for any of the version 1 and 2 series parts. Such as the SX-1/SX-2 camber arms or TSX-1/TSX-2 toe arms. We included a photo of the clamp so you can see what these bolts are for. The clamp is not included. We recommend putting a very small amount of anti-seize lubricant on the threads before assembly to make future adjustments easy. Please make sure they are tightened with a T-30 Torx bit. If you use an Allen wrench you will strip them. Please choose free shipping at check out.
Clamp Not Included With Bolts
-
Pack includes 10 Replacement Clips. (8 Clips for Full set + 2 Extra)
-
Please note: These wrenches are included in every Kit 1 or 2, SX-P2 TARTAN Arms, and SX-2 Camber Arms. They are sold separately in TSX-2 or 3/Y Arm purchases, since they are not essential for those arms. N2itive's Crow's Foot wrench can be used to turn the 30mm adjuster on our control arms. You'll want to loan this wrench to the alignment tech to make their job easier. Select free shipping at checkout to save on shipping. The red version is made from light weight 6061-T6 Aluminum and is 3/8" drive. The dark gray version is made from hardened steel and is 1/2" drive. The steel version of course is more robust and will last much longer and is highly recommended, especially for the SX-P2 arms.
