RSX-2 (2012-2020 S/X) Gen2 Lowering Links


Only 1 left in stock

RSX-2 Links are on Sale!

N2ITIVE’s RSX-2 lowering links for the Tesla Model S and X (2012-2020) are our previous generation (Gen2) Lowering Links, offering extreme precision and reliability for your car.  Super fast to install and adjust with installation time taking only 30-minutes.  Set them once and you’re done.  With the RSX-2 precision scale there is no need to go back and remove the links and measure with a caliper to re-adjust as with most adjustable links. When quality, craftsmanship and adjustability matter, our performance RSX-2 lowering links are the only choice. 6-year warranty included.

We have a limited stock of these models.  When they sell out, they’re gone.


Note: These links are for 2012 – 2020 and pre-refreshed Tesla Models S and X. If you have a 2021 refreshed Long Range or Plaid then please visit this link for the correct links:  2021+ Tesla S/X RSX-3 TARTAN Lowering Links

N2ITIVE’s performance RSX-2 ride height adjustment links are our previous generation lowering links for the Tesla Model S or X.  These links allow you to fully retain your active suspension dampening and software ride height adjustability with every setting now being a little lower than before.  Beyond lowering brackets, our super precision performance tuners allow you to tweak the length of the link down to 1/10 of a millimeter.  You’re never forced into one setting.  You choose the height you want.  Each link has a built-in Vernier scale so you always know what length you’re at and can easily assure all links are at the exact same setting for a precise ride height. No need to use a caliper every time you want to change your height.  Our links offer the ability to do a subtle drop or a completely slammed drop of your Model S or X.

The RSX-2 ride height adjustment links/lowering links come in two variations. Our anodized red version with a 6-year warranty and our black on black electroless nickel plated finish with a LIFETIME WARRANTY.  They are the perfect match for our SX-2 and TSX-2 control arms, allowing you to get both the ideal look and accurate alignment for your Model S or X while eliminating acceleration shudder and inner tire wear.  Each set comes with 4 links. Installation takes only 30 minutes.  Please note that your Tesla Model S or X must have air suspension to use lowering links.  If you’re not sure please contact us.

Please note that installing lowering links on your Tesla could cause inner tire wear if you don’t also install our adjustable control arms to reduce the excess negative camber that occurs when lowering the car. Inner tire wear can cause an unexpected blowout! Please keep an eye on your inner rear tires especially, and follow our alignment specs on the installation pages.  For this reason we recommend installing our Alignment Kit 1 which comes with the lowering links and both toe and camber arms as a set.  Alignment Kit 1 is our most popular kit.


Additional information

Weight 6 oz
Dimensions 6 × 6 × 1 in

RSX-2 Red & Clear Anodized, RSX-2 Two-Tone Black on Black Electroless Nickel Plated


There are no reviews yet.

Be the first to review “RSX-2 (2012-2020 S/X) Gen2 Lowering Links”

Your email address will not be published. Required fields are marked *


Go to Top